HANSA ISN-0050 - Names and Identifiers
HANSA ISN-0050 - Physico-chemical Properties
Molecular Formula | C9H9N
|
Molar Mass | 131.18 |
Density | 0.95 |
Boling Point | 98 °C (13.5018 mmHg) |
Water Solubility | Insoluble |
Storage Condition | Refrigerator (+4°C) |
Refractive Index | 1.507-1.51 |
Physical and Chemical Properties | Storage Conditions: recigerator (4 ℃) |
HANSA ISN-0050 - Risk and Safety
Hazard Symbols | Xn - Harmful
![Harmful](//res.chembk.com/assets/images/hs/Xn.gif)
|
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
|
Safety Description | S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
HS Code | 29299000 |
HANSA ISN-0050 - Introduction
(1-Isocyanoethyl)benzene is an organic compound with the chemical formula C9H9N. The following is a description of some information about the properties, uses, preparation and safety of the compound:
Nature:
1. Appearance:(1-Isocyanoethyl)benzene is a colorless liquid.
2. Density: its density is 0.965 g/mL.
3. Melting point:(1-Isocyanoethyl)benzene has a melting point of -5°C.
4. Stability: It is relatively stable at room temperature, but avoid prolonged exposure to the sun.
Use:
1. Synthesis: It can be used as an intermediate in organic synthesis and used in the synthesis of various organic compounds.
2. Polymer compound: It can be used as a monomer for polymer compounds, such as the synthesis of polymers.
Method:
The preparation method of (1-Isocyanoethyl)benzene can be achieved by the reaction of methylbenzyl bromide and isonitrile. The specific steps are as follows:
1. The methyl benzyl bromide is heated to react with the isonitrile in an appropriate solvent.
2. Purify the resulting product by distillation or other technical means.
Safety Information:
1. (1-Isocyanoethyl)benzene is a flammable liquid and should avoid contact with fire sources.
2. Use should be careful to avoid direct contact with skin, eyes and respiratory tract.
3. During the operation, appropriate protective equipment should be used, such as laboratory gloves, goggles, protective clothing, etc.
4. In storage and handling, should take the necessary fire prevention measures and ventilation facilities.
5. If leakage occurs, remove the leakage immediately and ensure adequate ventilation.
Last Update:2024-04-10 22:29:15